09.21.10 Client News

Consumers Digest awards Kolbe’s Latitude Series as a “Best Buy” for premium, vinyl replacement windows

Recognized as having exceptional value in today’s competitive marketplace, Kolbe’s Latitude Series received a Consumers Digest Best Buy rating for premium, vinyl replacement windows. According to the publication’s research, the premium designation is awarded to the products that “offer all the features a top-of-the-line buyer would want” for the greatest value.

Kolbe’s Latitude Series provides a full line of premium quality, vinyl windows and patio doors for both commercial and residential new construction and renovation applications. These units offer 0.30 U-Factor and 0.28 solar heat gain coefficient, qualifying for national home improvement tax credits.

Featured in Consumers Digest‘s September/October issue, among the attributes highlighted on Kolbe’s Latitude Series windows, the article states: “What sets this series apart from other models is that these windows have the best overall aesthetics and open, close and tilt better than all other vinyl models. …No other model’s interior surface has more seamless joint construction or does a better job of replicating the look of a wood-grain finish than this series does.”

“Mirroring the creative potential and exceptional performance, style and extensive options available in Kolbe’s wood products, Latitude presents a low-maintenance, alternative material of equivalent quality and dependable construction,” adds Mark Harger, general manager of Kolbe’s facility operations in Manawa, Wis. “Exterior colors and trims extend the design flexibility needed to complement nearly any architecture or décor.”

Combining traditional aesthetics with an ENERGY STAR® rating, these products rely on high-performance LoE glass as standard to deliver energy-efficiency, helping save money on heating and cooling bills. Standard glass used in Kolbe’s products contains 25-30 percent pre-consumer recycled content. The standard, BetterVue® screens’ charcoal-colored fiberglass mesh enhances the sense of openness, while increasing light transmission and insect protection. Rust- and corrosion-resistant, it is certified by GREENGUARD® for superior indoor air quality performance. Both the durability and low maintenance of Latitude Series windows contribute to reduced life cycle costs.

Consumers Digest’s research and editorial staff review each product, regardless of price, for:
*  Best performance
*  Greatest ease-of-use
*  Widest range of features
*  Greatest durability of design
*  Best warranty
*  Greatest efficiency
*  Best styling
*  Lowest maintenance needs
*  Easiest servicing

On average, a Consumers Digest Best Buy rating is awarded to less than three percent of competing models in any given product category. Selected products are nationally available and manufactured by a reputable company with a national dealer and support service network. Kolbe’s website offers an easy, ZIP code search tool to find the nearest dealer and suppliers.

To learn more about Kolbe’s Latitude Series and replacement windows, please call 888-831-5589 or visit www.kolbe-kolbe.com. For more information on Consumers Digest Best Buys, please visit www.consumersdigest.com.

NOTE: The Best Buy Seal is a registered trademark of Consumers Digest Communications, LLC, used under license.

Kolbe will be exhibiting at Greenbuild Booth #489

09.20.10 Association News

AAMA Fall Conference to Feature Keynote Speech on Benchmarking Green Performance, Codes and Regulatory Affairs Updates

The upcoming American Architectural Manufacturers Association (AAMA) Fall Conference, to be held October 10-13 in Santa Ana Pueblo (Albuquerque), N.M., will feature a full roster of task group meetings, including a meeting of the AAMA Codes Action Committee, which is responsible for developing code change proposals, public comments and AAMA positions primarily directed to the International Code Council, and proposals to selected state or local codes as determined necessary by the committee.

The work of this Committee comes in conjunction with the ICC development of the 2012 edition of the existing 2009 International Codes. The Committee has discussed the next set of code proposals and during the Fall Conference meeting will provide attendees with updates on the effects that this round of code development will have on the fenestration industry.

The Regulatory Affairs Committee, which is responsible for monitoring proposed regulations and determining necessary action by AAMA, will also be meeting at the Fall Conference to provide updates on regulations originating from sources including California Air Resources Board, ENERGYSTAR, Americans with Disabilities Act, Occupational Safety and Health Administration and Environmental Protection Agency. The Committee will provide relevant updates on regulations from these organizations as well as on state code activity reports.

Also to be featured at the Fall Conference is a keynote speech from Chris Nelson, the director of global commercial development for UL Environment. Nelson will provide an overview of the importance of third-party validation and certification of sustainable products, as well as how a company can set itself up for success to earn third-party claims by:
* Developing precise and measurable eco-claims
* Creating products in compliance with industry-wide sustainability standards
* Understanding the various sustainability aspects of products and document accordingly

Nelson will provide an overview of the growing demand for green building and the resulting shift that this demand has caused in the real estate and high-density residential construction markets, creating a marketplace focused on greener and more sustainable products. His speech will also detail how the sudden growth of residential and commercial green building projects has resulted in builders, specifiers, architects and general contractors seeking validation of green claims to ensure the products they purchase are truly green and meet the environ­mental claims being made. Manufacturers must now demonstrate the validity of their green products to build trust with the quickly growing green market.

“Looking towards our Fall Conference, we’re very pleased to be bringing Chris Nelson to share insight on the value of third-party validation and certification of sustainable products,” says Rich Walker, AAMA president and CEO. “This is a key topic in our industry right now, and green building has experienced positive growth in a time of economic recession. It is important, then, that we fully understand the impacts of the green building trend and how we can best rise to meet the growing demand for products that live up to their green claims.”

Development on a number of standards and educational courses will continue at the Fall Conference during the committee, task group and council meetings.

To register for the Fall Conference, please visit the event Web page. If you have any questions about the Fall Conference, or registration, please contact Kaydeen Laird, AAMA senior meetings coordinator.

More information about AAMA and its activities can be found via the AAMA Media Relations page or at the updated website, www.aamanet.org.

09.16.10 Association News

AAMA Voices Support for .30/.30 Tax Credit Changes

On September 16, Senate Finance Committee Chair Max Baucus (D-MT) introduced the Job Creation and Tax Cut Act of 2010. If enacted, the bill will link the 25(c) fenestration tax credits to 2010 ENERGY STAR® Program Requirements for Residential Windows, Doors, and Skylights, Version 5.0 (or any subsequent version of such requirements which is in effect after January 4, 2010). The tax credit is currently tied to the .30 U-factor/.30 SHGC threshold thought of as somewhat arbitrary by many industry professionals.

“We’re extremely pleased to see this legislation emerge as it benefits not only manufacturers of fenestration products, but also consumers,” said Rich Walker, American Architectural Manufacturers Association (AAMA) president and CEO. “Replacing the .30/.30 standard with the ENERGY STAR standards simplifies the process of purchasing fenestration products for the home, and of obtaining the tax credit for purchasing energy-efficient products.”

The $1,500 tax credit which was included in the American Recovery and Reinvestment Act currently limits the tax credit to the purchase of windows and doors which are equal to or below a U-factor of .30 and SGHC of .30.

The Job Creation and Tax Cut Act states that from the day the legislation is signed into law through 90 days after the passing of the legislation, both products that meet the .30/.30 standard as well as ENERGY STAR-labeled products will qualify for the tax credit. After this 90 day period, only ENERGY STAR-labeled products will qualify.

“The current .30/.30 ‘single value’ approach ignores years of development through a partnership between ENERGY STAR and manufacturers who worked collaboratively to develop performance criteria which made it possible to design the appropriate frame and glass technology to achieve maximum energy efficiency throughout the United States,” says Walker. “AAMA has remained steadfast in pressuring Congress to support this amendment. As the tax credit will expire on December 31st, 2010, our objective is to now request Congressional support of an extension of the credit linked to the widely accepted ENERGY STAR criteria.”

Further information about AAMA and its activities can be found via the AAMA Media Relations page or at the newly updated website, www.aamanet.org.

09.15.10 Association News

AAMA Launches FenestrationMasters Professional Certification Program at GlassBuild America

The American Architectural Manufacturers Association (AAMA) officially launched the new AAMA FenestrationMasters™ professional certification program at the 2010 GlassBuild America show, which opened this week in Las Vegas. The program also was introduced on Sept. 15 during the Window & Door Dealers Forum – one of the show’s educational seminars.

The FenestrationMasters program offers training content based on consensus-based AAMA standards. The program coursework covers a wide range of subject matters including performance standards, product and material types and code requirements. Coursework is accessed through MyWindowClass.com, which is owned and operated by the National Glass Association. The online education format allows professionals to complete the coursework at their own pace and convenience, simply through access to any computer with an Internet connection.

After attending the demonstration on the show’s opening day, Gantt Miller (Winco) stated, “The FenestrationMasters program provides credibility to the fenestration industry, AAMA and the individuals who achieve the credential.”

There will be two different credentials available through the program:
* Certified FenestrationMaster: To qualify for advanced certification, a four-year degree in engineering, architecture or applied sciences and four years of full-time fenestration-related experience is required or 72 months of full-time experience in the fenestration industry. This credential level requires successful completion of 50 hours of coursework, as well as achieving the required score on the certification exam.
* Certified FenestrationAssociate: To qualify for entry-level certification, a four-year degree and 12 months of full-time fenestration-related experience is required or 36 months of full-time experience in the fenestration industry. This credential level requires successful completion of 30 hours of coursework as well as achieving the required score on the certification exam.

Previews of FenestrationMasters course curriculum will be held daily during GlassBuild America in the show’s theater. Individuals who attend a demonstration, or sign up for the FenestrationMasters email list during the show will be entered  to win a $100 Visa gift card.

Please contact Angela Dickson, AAMA marketing manager, for more information regarding the FenestrationMasters program. More information about AAMA and its activities can be found at www.aamanet.org.

09.13.10 Client News

Eco-friendly copper finish enhances EcoLuminum by Tubelite

Tubelite Inc.‘s copper anodize finish creates a striking visual effect that retains its bright metallic appearance, while extending the environmentally-responsible, low-maintenance benefits of its storefront, curtainwall, entrance and daylight control systems.

Ideal for the Southwestern aesthetic and for historically-influenced design palettes, the copper anodize withstands extreme environments and the trials of time. Providing superior abrasion resistance and durability, the anodize finish is applied and tested to meet all AAMA 611 Class 1 specifications. This eco-friendly finish will not reveal its age with a patina.

Offered as a standard color choice, no custom color-matching is necessary. No clear coat or periodic lacquer treatments are required to preserve its copper color. There are no limits on shapes or quantities and the finish can be applied to both aluminum sheets and extrusions. Once installed, there is no need to worry about run-off stains or galvanic corrosion from copper ions.

The copper anodize creates a soft, matte finish that helps hide small imperfections that may occur on the surface of recycled aluminum. All of Tubelite’s architectural products are manufactured using EcoLuminum™, a high recycled-content aluminum billet composition. EcoLuminum consumes 95% less energy to produce than standard billet.

The eco-friendly anodize finish also reduces energy use and produces up to 90% less waste than traditional anodize processes. The process byproducts from the bath are recyclable. Applied in Linetec’s state-of-the-art finishing facility, the anodize process produces no volatile organic compounds (VOCs) . No-VOC finishes and secondary billet contribute to projects seeking certification under the U.S. Green Building Council’s LEED® Green Building Rating System™.

To learn more about EcoLuminum by Tubelite and its eco-friendly finishes, please visit http://www.tubeliteinc.com, or connect in person at GlassBuild America #535 and at GreenBuild #L516.

###

09.10.10 Association News

Seasonal Window Safety: Tips for Staying Safe Around Windows Year-Round

As the hotter summer months give way to cooler fall weather, many homeowners leave windows and screen doors open for ventilation. While open windows can provide fresh air in the home, they can also be dangerous for young children who are not properly supervised. While the number of falls from windows is generally small compared with other recorded child injuries, a window incident can result in serious injury or even death. Therefore, it is important for parents and caregivers to be aware of safety around windows.

The fall season, when children are returning to school, is an effective time to both survey the possible dangers in the home as well as to educate children and other family members about the dangers of open windows and the importance of accident prevention.

The National Safety Council’s (NSC) Window Safety Task Force offers these tips to protect children from window falls:
* Avoid the placement of furniture near windows to prevent children from climbing.
* Do not rely on insect screens to prevent a window fall.
* Keep children’s play away from open windows and doors.
* Install building code-compliant devices designed to limit how far a window will open or window guards with release mechanisms to help prevent a fall.
* Teach your child how to safely use a window to escape during an emergency.

“Window safety is an important topic in our industry, but also in our daily lives,” says Rich Walker, president and CEO of the American Architectural Manufacturers Association (AAMA). “We want to ensure that parents and caregivers are aware of the possible dangers of window falls, so that they can take proper precautions and help ensure the safety of young children. AAMA is proud to participate on the National Safety Council’s Window Safety Task Force to provide year-round education that will keep families safer and aid in the prevention of accidental falls and injuries through windows.”

Window Safety Week, sponsored by the Window Safety Task Force, is held every year during the first week of April. Though this is an important time to heighten awareness, education on window safety should be an ongoing effort and should occur throughout the year. To help teach children about window safety, an activity book is available on the task force’s website in addition to information for parents and caregivers. More information and additional resources, including safety tips, are located at http://www.nsc.org/windowsafetytaskforce.
###

09.09.10 Association News

AAMA Hires Southeast Region Codes Consultant

The American Architectural Manufacturers Association (AAMA) has announced that effective September 1, 2010, Dwight Wilkes will be working as the association’s consultant on codes issues pertaining to the Southeast Region of the U.S.

As a part of this consultant role, Wilkes will utilize his existing relationships with key staff and officials in the Florida Building Commission, and Southeast Region state and local building and energy code organizations to help keep AAMA’s members informed about code changes affecting the southeast states. He will analyze the effects of proposed state code changes in order to determine the impact on the industry, specifically on the business and products of AAMA member companies.

“We’re proud to have Dwight managing our Southeast Region code activities and building on the long history of achievements and timely communications we’ve already established,” says Rich Walker, AAMA president and CEO. “His years of experience and extensive knowledge of the building industry, specifically issues affecting the Southeastern U.S., will serve as a considerable asset to our association and to our members.”

Wilkes is a former building official in St. John’s County, Fla., and comes to this consulting role with extensive experience as a plans examiner as well.

Wilkes will additionally advocate recommended Southeast Region code change proposals and public comments within the appropriate state code arenas as well as reporting the results of code hearings to both AAMA regional and national members.

More information about AAMA Southeast Region activities can be found via the Southeast Region portion of AAMA’s website. Further information about AAMA and its activities can be found via the AAMA Media Relations page or at the newly updated website, www.aamanet.org.

###

09.08.10 Client News

Linetec.com honored with Crystal Achievement Award

The 2010 Crystal Achievement Awards will recognize http://www.Linetec.com as one the industry’s most innovative websites at the GlassBuild America conference, Sept. 14-16, in Las Vegas, and in the September issue of Glass Magazine.

Linetec, the nation’s largest, independent, architectural finishing company, launched its newly designed website in March 2010. It includes easier navigation and expanded content to connect online visitors with its architectural finishing resources. Linetec.com, organizes information into categories addressing paint, anodize and powder coat, as well as additional services and company news. Special sections also highlight Linetec’s expertise with green building goals and on-site repair and restoration projects.

Selected by a panel of judges representing all segments of the glass industry, the Crystal Achievement Awards recognize the best products and glass applications the commercial, retail and fabrication markets have to offer. Judges selected award-winning entries in the Most Innovative Website category for each a large, medium and small company. Linetec.com was honored with the medium-sized company distinction.

Serving companies of all sizes, Linetec’s homepage connects visitors within two clicks to all of the site’s deeper content. Architects can click instantly on “Architect Resources” for immediate access to request paint sample color chips, review the company’s sustainability statement and project profiles, delve into finish selections and specifications, or earn learning units with “Introduction to Coatings,” a Continuing Education Series presentation approved by the American Institute of Architects.

The site also features a special login for Linetec’s customers to view real-time information and metrics regarding their orders. Active client accounts can view both current projects and an archive of completed and quoted projects. Under the “Company” section, all users have on-demand access to Linetec’s online quote request submission form and to a directory of Linetec’s most sought-after contacts.

Reflecting its staff’s expertise and company leadership, Linetec previously earned several other regional and national awards including the 2008 Crystal Achievement Awards’ “Best Plant,” #1 Best Place to Work in the architectural products and glass industry by U.S. Glass magazine in 2006, the 2006 Manufacturer of the Year Award, and the Wisconsin Governor’s Award as an Exemplary Employer.
###

09.07.10 Client News

Michael Augustine named as Tubelite’s Indiana representative

Tubelite Inc. has added Michael Augustine as its manufacturer’s representative providing storefront, curtainwall, entrance and daylight control systems to commercial building teams throughout Indiana.

Augustine draws from 14 years of experience partnering with architects, contractors, building owners and consultants in the central states. “I’m happy to represent Tubelite. The company has a solid reputation for personalized service and dependable quality,” says Augustine. “This is a strong market for Tubelite’s energy-efficient, durably-finished, sustainably-focused products.”

Tubelite’s products can contribute to projects pursuing certification through the U.S. Green Building Council’s LEED® Rating System™ in the areas of daylighting and views, thermal comfort and energy efficiency, low-emitting materials and recycled content. All of Tubelite’s architectural products are manufactured using EcoLuminum™, a high recycled-content aluminum billet composition featuring environmentally-friendly finishes.

Tubelite’s products are factory-finished by Linetec using finishes with low or no volatile organic compounds (VOCs). Its popular, no-VOC, eco-friendly anodize finish also reduces energy use and produces up to 90% less waste than traditional anodize processes. Linetec also provides these finishes for Wausau Window and Wall Systems‘ high-performance products, which Augustine also represents.

###

09.07.10 Client News

Historic, hurricane-resistant, green-designed library relies on Kolbe’s Ultra Series high-performance windows

New York’s Westhampton Free Library combines historic aesthetics and hurricane performance, while seeking Gold-level certification under the LEED® Green Building Rating System. Kolbe’s high-performance windows and a collaborative building team helped achieve the project’s multiple objectives.

Located within a mile of the Atlantic Ocean, this community landmark has resided on Library Avenue for more than 100 years. Opened in June 2010, the new library sits on the site of two previous buildings that were demolished in September 2008. One of the buildings had been an abandoned hardware store, reconfigured for library activities. The other had been expanded five times throughout its existence. These disconnected, aging structures could no longer support the requirements of a modern library.

Public meetings were held to ensure that the new facility met the community’s needs now and in the future. Sandpebble Builders Inc.‘s Dan Kowalski, LEED-AP, explains, “Known as ‘dynamic design charrettes,’ these meetings included library board members, users and staff, plus politicians, community leaders and other stakeholders. They were asked what they liked about the old building, and what they wanted to see in a new building.”

Kowalski recalls that charrette participants clearly “said that they wanted to stay on Library Avenue, which is a very small parcel of land; that they liked the look of the old building; and that reading spaces with natural light and fresh air were important to them.”

Armed with this and other feedback, the Project Architect, Ward Associates, P.C., designed a classic Colonial Revival building with innovative functionality and modern performance. The new 14,250-square-foot structure replicates the original, one-story, wood-framed library, while providing twice the square footage, adding an outdoor reading garden and accommodating future expansion.

Ward’s associate, Pansy Cheng, RA, LEED-AP, elaborates, “To create a new library building that accurately represents the original library and blends in within its neighbors, we incorporated the period architectural elements such as a U-shaped floor plan, symmetrical façades, multi-pane windows with shutters and fiber-cement shingle siding.”

She continues, “The windows on Westhampton Free Library must protect the building from hurricanes, resist salt spray and corrosion, provide high insulation value, and provide occupants with exterior views and daylighting, all while doing so attractively and true to the historical, Colonial character of the original library building built in 1906.”

To meet this tall order, Ward Associates, P.C., selected Kolbe’s Ultra Series extruded aluminum clad windows with K-Force® Impact performance, for their strength, durability and custom capabilities. The extruded aluminum billet of the windows’ exteriors consists of 50-75% recycled content, which helps the building qualify for LEED Gold certification. Extending the products’ longevity and ease-of-maintenance, the aluminum is finished in a fluoropolymer paint that carries a warranty, which includes salt spray and other environmental conditions.

On the library’s interior, ensuring the windows maximized daylighting was of high importance. The architect chose 8-foot-high, oversized windows mimicking traditional, cottage-style, double-hung windows to overlook the 1,800-square-foot reading garden on the south side of the library. According to Cheng, “The high visual transmittance value of the windows provides 73% of all regularly occupied spaces with daylighting. More than 90% of occupants have direct views of the outdoors.”

The garden area’s south-facing windows were crafted by factory-mulling together a 72-inch fixed casement with a 24-inch operable awning transom with steel reinforcements. A number of 8×8-foot openings on the front of the building required the windows to be mulled on site. “It was a team effort to find the proper combination of products to match the project’s needs,” says Geoff Penny of Marjam Supply Company, the local Kolbe dealer.

“Kolbe’s windows are similar in style to the windows at our previous location, but of course, have so much more going for them in performance,” adds Matthew Bollerman, director of the Westhampton Free Library.

Kolbe’s windows were crafted in rectangular and half-circle casements, awnings and elliptical radius window units. Performance Divided Lites (PDLs) with 7/8-inch ovolo muntin bars were specified to simulate the historic style of true divided lites. Special muntin bar patterns also were created for the radius, “eyebrow” windows. Cheng says some of these eyebrow windows are up to 10-feet-wide and “provide traditional detail to the building façade.”

Other architectural details include the built-in window seats incorporated into the highly-insulated, 16-inch-thick walls and the three “roof monitors” composed using Kolbe’s Ultra Series fixed casements to transmit natural daylight. “In lieu of skylights, we used traditional windows perched at the roofline to create light shafts in the children’s reading area on the second floor,” says Kowalski. “To help manage the thermal heat gain, we used smaller windows on the South side and larger windows on the North.”

Cheng agrees, saying it creates “a bright and cheerful learning environment, while reducing energy consumption.” In addition, she says, “The high energy performance of the windows helps the new library to reduce energy costs by 35% below the ASHRAE 90.1 baseline building model.”

Ten percent of the building’s electrical power comes from renewable energy and energy is used efficiently throughout the building. Specially formulated to block 83% of the sun’s harmful ultraviolet rays and 96% of the sun’s infrared heat, Kolbe’s Ultra Series K-Force Impact products feature laminated insulated units with LoE²-270 glass.

“The highly-efficient windows provide good light transmission, thermal and moisture control and are operable for,” Kowalski emphasizes. “These large windows are hurricane-rated due to the library’s proximity to the coast.”

Cheng describes the hurricane impact resistant qualities: “These three-pane windows – insulated glass on the outside, backed with a shatter-resistant polymer core – withstand repeated blows from an 8-foot-long, 2×4 stud shot from a cannon at 50 feet per second to simulate flying debris. Concealed stainless steel hinges and brackets provide hurricane resistance without sacrificing the historical aesthetics of the windows.”

The library’s design and building team also were pleased that Kolbe windows’ laminated lites not only help to withstand high winds and flying debris, and to optimize energy efficiency, but also help to block street noise from the library interior. Many of the library’s high-performance, resource-conserving features are quietly invisible to visitors. As examples, the displacement ventilation system is hidden within a raised floor system; the geothermal heat pumps are located out-of-sight, below ground; and the photovoltaic panels are veiled by the roofline.

The false mansard roof also hides the second floor from the street-view, “giving the illusion of an old, traditional one-story structure without appearing out of scale within its surroundings,” says Cheng. “By combining classical proportion and scale with energy-efficient systems and ecological construction, Kolbe & Kolbe is able to accurately replicate the past, while embracing the future for Westhampton Free Library.”

“Everyone is very happy with the windows and the community is happy with the building,” Kowalski concludes. “It is the most thermally-efficient, well-designed building with which I’ve been involved.”

As the library’s director, Bollerman offers additional praise: “Patrons have loved the new building since we opened. They are pleased with how bright and welcoming the spaces are.”

Westhampton Free Library
7 Library Avenue, Westhampton Beach, N.Y.
* Architect:   Ward Associates, P.C.; Bohemia, N.Y.
* Construction manager:   Sandpebble Builders, Inc.; Southampton, N.Y.
* Window dealer:   Marjam Supply Company; Mattituck, N.Y.
* Window distributor:   Garden State Millwork; Oakland, N.J.
* Window manufacturer:   Kolbe & Kolbe Millwork Co., Inc.; Wausau, Wis.

High-resolution project photos are available in Kolbe’s online press room.